UV LED Light Source Foot Pedal

Our company supplies one foot pedal as standard; there are two wiring configurations as follows:

The first scenario involves individual control of each head. Taking the CH1 light as an example, there is no distinction between the red and white wires: one wire is connected to the light (CH1) to be controlled, and the other to GND. Please note that the black wire is left unused. (Individual control of each head requires a corresponding number of footswitches; our standard factory configuration includes one.)

Controlled separately by four channels. As shown in the diagram, the four channels are controlled separately. The four red wires are connected to CH1, CH2, CH3 and CH4 respectively, whilst the other white wire is connected to GND. The black wire is left unconnected.

The second scenario involves simultaneous control: to control the switching on and off of multiple lamp heads at the same time, connect one wire to CH and the other to GND. The black wire is left unconnected. (Only one foot switch is required, whether for a single lamp head or multiple lamp heads.)

If you wish to control all four lamp heads so that they switch on and off simultaneously, this function is available in countdown mode (with CH and GND connected). Otherwise, the lamps can only be switched on using the foot pedal and switched off manually via the control panel.

To control each lamp individually, connect them to CH1/CH2/CH3/CH4 and GND respectively. Only when controlled individually is it possible to use the foot switch to turn the lamps on and off.

Enables simultaneous control of the switching on and off of four light fittings; both operations can be carried out via the control panel.