10.3-inch UV-LED collimating parallel light lens

3D-printed lenses, 3D composite lens sets, UV LED lenses, 3D printer light source modules

10.3-inch 40-in-1 (405 nm UV LED + power supply + heat sink + aluminium substrate + lens + bracket)

Optical parameters of the 405 nm UV LED:

LED power: 3 W 5 × 8 = 40 LEDs

Total power: 40 × 3 W = 120 W

Wavelength: 405 nm

Angle: Collimation: 3.5 degrees

Uniformity: 90%

Introduction to Parallel Light Sources / Introduction to parallel light
1. Parallel light is usually used for high-precision measurements
A parallel light source is normally used for high-precision measurements
2. Parallel light has high contrast at the edges
Parallel light exhibits very high contrast at the edge.
3. Reducing diffuse reflection aids in the recognition of image boundaries
It reduces diffuse reflection, which is beneficial for image boundary recognition.

Lens dimension markings

other:
This product must not be used under the following conditions; if it is used under these conditions, it is necessary to assess its effectiveness and risks:
—Direct or indirect exposure to water or damp, such as being caught in the rain;
—damaged or eroded by seawater;
— Exposure to corrosive gases (such as Cl₂, H₂S, NH₃, SOx, NOx, etc.);
— exposure to dust, liquids or oil;
The product is not suitable for use under the following conditions;
—-Direct or indirect exposure to wet or damp conditions, such as rain, etc.;
—-in contact with seawater and erosive materials;
—-Exposure to corrosive gases (e.g. Cl₂, H₂S, NH₃, SOx, NOx, etc.);
—-Exposed to dust, liquids or oils;