5V Mini Fan – Genuine Taiwan-made SUNON Mini Fan, SUNON 0.63W MF17080V2

5V Mini Fan – Genuine Taiwan-made SUNON Mini Fan, SUNON 0.63W MF17080V2

Parameter

Brand: SUNON

Model: ME40100V1-000C-A99

DC 5V 0.63W

For further details and specifications, please contact the shopkeeper.

III. OTHER SPECIFIED TESTS

The following is a general description of certain tests carried out on

representative SUNON fans. Nothing in this document is intended to suggest that these

Tests are carried out on every SUNON fan model. Furthermore, the descriptions that

The descriptions following each test are intended merely to provide a general explanation of each test. If you

I would like a more detailed explanation regarding any test mentioned in this section, SUNON

can provide such an explanation upon request.

1. DROP PROOF TEST

Fans are packed in a standard-sized shipping box and are dropped onto the ground from

certain heights and angles, depending on the weight of the specific box.

2. HUMIDITY RESISTANCE TEST

The fan is operated for 96 continuous hours in an environment with a humidity of 90% to

95% RH at 60°C ± 2°C.

3. VIBRATION TEST

A vibration with an amplitude of 2 mm and a frequency of 5–55–5 Hz is applied to all three

in the directions (X, Y, Z), in cycles of one hour each, for a total vibration time of three hours.

4. THERMAL CYCLING TEST

The fan is operated in a test chamber for 50 cycles. In each cycle, the temperature is

was gradually increased from -10°C to 70°C over 90 minutes, and subsequently operated at

70°C for 120 minutes. The temperature is then gradually reduced from 70°C to -10°C

for 90 minutes, and was subsequently operated at -10°C for 120 minutes.

5. SHOCK RESISTANCE TEST

A force of 100G is applied in the three directions (X, Y and Z) for 2 milliseconds in each direction.

6. LIFE EXPECTANCY

The “life expectancy” of SUNON fans is determined during SUNON’s reliability testing

laboratory using temperature chambers. The “life expectancy” of this fan has not

has been evaluated for use in combination with any end application. Therefore, the Life

Expectancy Test Reports (L10 and MTTF Report) relating to this fan are intended solely for

reference.IV. DEFINITION OF CHARACTERISTICS

The following is a general description of certain tests carried out on

representative SUNON fans in order to determine the fan’s specifications. Nothing

The purpose of this document is to suggest that these tests be carried out on every model of

SUNON fan. Furthermore, the descriptions provided after each test are intended solely to provide

a general explanation of each test. If you would like a more detailed explanation of

For any test identified in this Section, SUNON may provide such an explanation upon

request.